Bitmap objects

acquire_bitmap
acquire_screen
bitmap_color_depth
bitmap_mask_color
create_bitmap
create_bitmap_ex
create_sub_bitmap
create_system_bitmap
create_video_bitmap
destroy_bitmap
is_linear_bitmap
is_memory_bitmap
is_planar_bitmap
is_same_bitmap
is_screen_bitmap
is_sub_bitmap
is_system_bitmap
is_video_bitmap
lock_bitmap
release_bitmap
release_screen
screen
set_clip

Once you have selected a graphics mode, you can draw things onto the display via the 'screen' bitmap. All the Allegro graphics routines draw onto BITMAP structures, which are areas of memory containing rectangular images, stored as packed byte arrays (in 8 bit modes one byte per pixel, in 15 and 16 bit modes sizeof(short) bytes per pixel, in 24 bit modes 3 bytes per pixel and in 32 bit modes sizeof(long) bytes per pixel). You can create and manipulate bitmaps in system RAM, or you can write to the special 'screen' bitmap which represents the video memory in your graphics card.

For example, to draw a pixel onto the screen you would write:

   putpixel(screen, x, y, color);

Or to implement a double-buffered system:

   BITMAP *bmp = create_bitmap(320, 200);    // make a bitmap in RAM
   clear_bitmap(bmp);                        // zero the memory bitmap
   putpixel(bmp, x, y, color);               // draw onto the memory bitmap
   blit(bmp, screen, 0, 0, 0, 0, 320, 200);  // copy it to the screen

See below for information on how to get direct access to the image memory in a bitmap.

Allegro supports several different types of bitmaps:

The screen bitmap, which represents the hardware video memory. Ultimately you have to draw onto this in order for your image to be visible. It is destroyed by any subsequent calls to set_gfx_mode().
Memory bitmaps, which are located in system RAM and can be used to store graphics or as temporary drawing spaces for double buffered systems. These can be obtained by calling create_bitmap(), load_pcx(), or by loading a grabber datafile.
Sub-bitmaps. These share image memory with a parent bitmap (which can be the screen, a memory bitmap, or another sub-bitmap), so drawing onto them will also change their parent. They can be of any size and located anywhere within the parent bitmap, and can have their own clipping rectangles, so they are a useful way of dividing a bitmap into several smaller units, eg. splitting a large virtual screen into multiple sections (see examples/exscroll.c).
Video memory bitmaps. These are created by the create_video_bitmap() function, and are usually implemented as sub-bitmaps of the screen object. They must be destroyed by destroy_bitmap() before any subsequent calls to set_gfx_mode().
System bitmaps. These are created by the create_system_bitmap() function, and are a sort of halfway house between memory and video bitmaps. They live in system memory, so you aren't limited by the amount of video ram in your card, but they are stored in a platform-specific format that may enable better hardware acceleration than is possible with a normal memory bitmap (see the GFX_HW_SYS_TO_VRAM_BLIT and GFX_HW_SYS_TO_VRAM_BLIT_MASKED flags in gfx_capabilities). System bitmaps must be accessed in the same way as video bitmaps, using the bank switch functions and bmp_write*() macros. Not every platform implements this type of bitmap: if they aren't available, create_system_bitmap() will function identically to create_bitmap(). They must be destroyed by destroy_bitmap() before any subsequent calls to set_gfx_mode().

extern BITMAP *screen;

Global pointer to a bitmap, sized VIRTUAL_W x VIRTUAL_H. This is created by set_gfx_mode(), and represents the hardware video memory. Only a part of this bitmap will actually be visible, sized SCREEN_W x SCREEN_H. Normally this is the top left corner of the larger virtual screen, so you can ignore the extra invisible virtual size of the bitmap if you aren't interested in hardware scrolling or page flipping. To move the visible window to other parts of the screen bitmap, call scroll_screen(). Initially the clipping rectangle will be limited to the physical screen size, so if you want to draw onto a larger virtual screen space outside this rectangle, you will need to adjust the clipping.

See also: set_gfx_mode, is_screen_bitmap, create_video_bitmap, scroll_screen.

BITMAP *create_bitmap(int width, int height);

Creates a memory bitmap sized width by height, and returns a pointer to it. The bitmap will have clipping turned on, and the clipping rectangle set to the full size of the bitmap. The image memory will not be cleared, so it will probably contain garbage: you should clear the bitmap before using it. This routine always uses the global pixel format, as specified by calling set_color_depth().

See also: create_bitmap_ex, create_sub_bitmap, create_video_bitmap, create_system_bitmap, destroy_bitmap, set_color_depth, is_memory_bitmap.

BITMAP *create_bitmap_ex(int color_depth, int width, int height);

Creates a bitmap in a specific color depth (8, 15, 16, 24 or 32 bits per pixel).

See also: create_bitmap, create_sub_bitmap, create_video_bitmap, create_system_bitmap, destroy_bitmap, is_memory_bitmap.

BITMAP *create_sub_bitmap(BITMAP *parent, int x, y, width, height);

Creates a sub-bitmap, ie. a bitmap sharing drawing memory with a pre-existing bitmap, but possibly with a different size and clipping settings. When creating a sub-bitmap of the mode-X screen, the x position must be a multiple of four. The sub-bitmap width and height can extend beyond the right and bottom edges of the parent (they will be clipped), but the origin point must lie within the parent region.

See also: create_bitmap, create_bitmap_ex, destroy_bitmap, is_sub_bitmap.

BITMAP *create_video_bitmap(int width, int height);

Allocates a video memory bitmap of the specified size, returning a pointer to it on success or NULL on failure (ie. if you have run out of vram). This can be used to allocate offscreen video memory for storing source graphics ready for a hardware accelerated blitting operation, or to create multiple video memory pages which can then be displayed by calling show_video_bitmap(). Video memory bitmaps are usually allocated from the same space as the screen bitmap, so they may overlap with it: it is not therefore a good idea to use the global screen at the same time as any surfaces returned by this function.

See also: create_bitmap, create_bitmap_ex, create_system_bitmap, create_sub_bitmap, destroy_bitmap, screen, show_video_bitmap, gfx_capabilities, is_video_bitmap.

BITMAP *create_system_bitmap(int width, int height);

Allocates a system memory bitmap of the specified size, returning a pointer to it on success or NULL on failure.

See also: create_bitmap, create_bitmap_ex, create_video_bitmap, create_sub_bitmap, destroy_bitmap, is_system_bitmap.

void destroy_bitmap(BITMAP *bitmap);

Destroys a memory bitmap, sub-bitmap, video memory bitmap, or system bitmap when you are finished with it.

See also: create_bitmap, load_bitmap.

void lock_bitmap(BITMAP *bitmap);

Under DOS, locks all the memory used by a bitmap. You don't normally need to call this function unless you are doing very weird things in your program.

int bitmap_color_depth(BITMAP *bmp);

Returns the color depth of the specified bitmap (8, 15, 16, 24, or 32).

See also: set_color_depth, bitmap_mask_color.

int bitmap_mask_color(BITMAP *bmp);

Returns the mask color for the specified bitmap (the value which is skipped when drawing sprites). For 256 color bitmaps this is zero, and for truecolor bitmaps it is bright pink (maximum red and blue, zero green).

See also: MASK_COLOR_8, set_color_depth, bitmap_color_depth.

int is_same_bitmap(BITMAP *bmp1, BITMAP *bmp2);

Returns TRUE if the two bitmaps describe the same drawing surface, ie. the pointers are equal, one is a sub-bitmap of the other, or they are both sub-bitmaps of a common parent.

See also: create_sub_bitmap.

int is_linear_bitmap(BITMAP *bmp);

Returns TRUE if bmp is a linear bitmap, ie. a memory bitmap, mode 13h screen, or SVGA screen. Linear bitmaps can be used with the _putpixel(), _getpixel(), bmp_write_line(), and bmp_read_line() functions.

See also: is_planar_bitmap, is_memory_bitmap.

int is_planar_bitmap(BITMAP *bmp);

Returns TRUE if bmp is a planar (mode-X or Xtended mode) screen bitmap.

See also: is_linear_bitmap, is_memory_bitmap.

int is_memory_bitmap(BITMAP *bmp);

Returns TRUE if bmp is a memory bitmap, ie. it was created by calling create_bitmap() or loaded from a grabber datafile or image file. Memory bitmaps can be accessed directly via the line pointers in the bitmap structure, eg. bmp->line[y][x] = color.

See also: is_linear_bitmap, is_planar_bitmap.

int is_screen_bitmap(BITMAP *bmp);

Returns TRUE if bmp is the screen bitmap, or a sub-bitmap of the screen.

See also: screen, create_sub_bitmap.

int is_video_bitmap(BITMAP *bmp);

Returns TRUE if bmp is the screen bitmap, a video memory bitmap, or a sub-bitmap of either.

See also: screen, create_video_bitmap, create_sub_bitmap.

int is_system_bitmap(BITMAP *bmp);

Returns TRUE if bmp is a system bitmap object, or a sub-bitmap of one.

See also: create_system_bitmap, create_sub_bitmap.

int is_sub_bitmap(BITMAP *bmp);

Returns TRUE if bmp is a sub-bitmap.

See also: create_sub_bitmap.

void acquire_bitmap(BITMAP *bmp);

Locks the specified video memory bitmap prior to drawing onto it. This does not apply to memory bitmaps, and only affects some platforms (Windows needs it, DOS does not). These calls are not strictly required, because the drawing routines will automatically acquire the bitmap before accessing it, but locking a DirectDraw surface is very slow, so you will get much better performance if you acquire the screen just once at the start of your main redraw function, and only release it when the drawing is completely finished. Multiple acquire calls may be nested, and the bitmap will only be truly released when the lock count returns to zero. Be warned that DirectX programs activate a mutex lock whenever a surface is locked, which prevents them from getting any input messages, so you must be sure to release all your bitmaps before using any timer, keyboard, or other non-graphics routines!

See also: release_bitmap, acquire_screen, release_screen.

void release_bitmap(BITMAP *bmp);

Releases a bitmap that was previously locked by calling acquire_bitmap(). If the bitmap was locked multiple times, you must release it the same number of times before it will truly be unlocked.

See also: acquire_bitmap, acquire_screen, release_screen.

void acquire_screen();

Shortcut version of acquire_bitmap(screen);

See also: acquire_bitmap, release_bitmap, release_screen.

void release_screen();

Shortcut version of release_bitmap(screen);

See also: acquire_bitmap, release_bitmap, acquire_screen.

void set_clip(BITMAP *bitmap, int x1, int y1, int x2, int y2);

Each bitmap has an associated clipping rectangle, which is the area of the image that it is ok to draw on. Nothing will be drawn to positions outside this space. Pass the two opposite corners of the clipping rectangle: these are inclusive, eg. set_clip(bitmap, 16, 16, 32, 32) will allow drawing to (16, 16) and (32, 32), but not to (15, 15) and (33, 33). If x1, y1, x2, and y2 are all zero, clipping will be turned off, which may slightly speed up some drawing operations (usually a negligible difference, although every little helps) but will result in your program dying a horrible death if you try to draw beyond the edges of the bitmap.

There's no get_clip like function. To obtain the clipping rectangle of an existing bitmap, check the appropiate fields of the BITMAP structure holding it.

Back to contents